This one is for everyone that wants us to get back to basics. For those that only have an hour here and there - after school, after work, or during the school holidays. That used to be me. I used to come down to rock walls just like this one and chase bream on bait, and I absolutely loved it. It's where I learnt most of what I know about fishing, and if I'm being honest, I hadn't done it for a long time. So, on this episode of The Everyday Angler… we fixed that.
The brief was simple: I had about an hour, an hour and a half max, before I had to get back to work. One rod (okay, two), one packet of hooks, a few different baits, and a walk down to the local rock wall. No boat, no kayak, no fancy gear. And what unfolded was one of the most fun sessions I've had in ages – including hooking a proper 40-plus centimetre bream, dropping it at my feet because my net was sitting up on the rocks behind me (classic), and then grinding my way back to redemption one cast at a time.
If you've ever wanted proof that you don't need much to have a great session, this is it. Here's everything we used, how we rigged it, and the theories that put fish on the rocks.
Quick Links
The Location: Reading a Rock Wall
Rock walls are everywhere in Australia – nearly every coastal town has one guarding a river mouth or a harbour and they are absolute fish magnets. But not every metre of a rock wall is equal, so it pays to have a quick look before you pick your spot.
On this session, the wall itself didn't have a whole lot of coverage or wash on it, except for one little patch. A sand bank had built up behind me from some of the big storms, and it was pushing a nice line of white water along the face of the wall, leaving a patch of bubbles on the surface. That was the only real "life" on the wall, so that's where I set up.
The theory was straightforward. It was the middle of the day (literally midday when I started) and in bright conditions, fish like bream will often tuck in under cover rather than sit out in open, sunlit water. That patch of whitewash is like an umbrella. My plan was to pitch a bait up into the wash and let it drift along the edge of the wall with the tide, then repeat the process. The hope: a bream comes up from the deeper water, has a look at what's tumbling around in the bubbles, and finds my bait.
Sure enough, that's exactly what happened. First drift, the line started peeling off. Game on.
The Tackle: As Simple As It Gets
I say this a lot on the show, but fishing should be accessible to everyone, and this style of fishing is about the lowest barrier to entry there is. We walked to the spot. We bought one packet of hooks and a few packets of bait. That's it.
I fished a light spin outfit with 8lb line, which is a lovely all-round line class for rock wall bream. It's light enough that an unweighted bait drifts naturally and you can feel every pick and rattle, but it's still got enough grunt to lift a decent bream up the rocks as I found out when I swung a couple straight up the wall (the big one that got away is another story, and we'll get to the lesson from that in the tips section).
The other piece of tackle worth mentioning is a landing net - specifically one designed for rock walls, with a long handle so you can reach down to the water. I brought one. I just didn't have it next to me when the biggest bream of the session came along. Learn from me.
The Rigs: One Hook, One Knot
In terms of the rig, this is as simple as it gets, and I'm not exaggerating. Rig number one was a single hook tied straight to the end of my line. One hook, one knot, done. No swivel, no trace, no sinker. That's genuinely the whole rig.
Why fish unweighted? Because it looks so natural. With the tide taking the pressure off the line, the bait just wafts down along the edge of the rock wall like a piece of food that's been washed off the rocks. When a bream picks it up, there's no sinker weight to feel, so they hang onto it with confidence. The bite is different too – instead of a traditional rattle, the line just starts peeling off as the fish moves away with the bait, because you're fishing with a lot of slack.
Rig number two was exactly the same, but with a small ball sinker running straight down to the hook. After I donated a rig to a rock (when you fish around structure, you can expect to get snagged – that's the tax), I made the switch, and it turned out to be the difference-maker on the day. My theory was that the extra weight would get the bait down slightly deeper in the water column to where the fish were holding. It introduced a few more snags, but I went from the occasional bite to a bite nearly every single cast.
That's the beauty of carrying two setups or at least a couple of sinker options: you can test both and let the fish tell you what they want. On another day, unweighted might win. Today, a little bit of lead won it.
The Baits: Pilchards, Garfish and Mullet
I brought a selection of baits with me, all of which you can grab from the freezer at your local BCF. The lineup: pilchards, garfish and mullet.
The humble pilchard is probably the most purchased bait in the country – it's cheap, it's oily, and everything eats it. That's where I started, and I caught half a dozen bream on it. Then I switched over to garfish, which look similar to a pilchard but are actually quite a different bait – a bit softer in texture, with that lovely silver flash. Funnily enough, the garfish went quiet for five or six casts and I was ready to write it off… right up until it produced one of the better bream of the session, with the gar poking out of its mouth as proof. And mullet is the tough guy of the trio – a firm flesh bait that stays on the hook well and cuts beautifully into strips.
The real lesson is to carry a couple of options. Some days they'll only want prawns. Some days it's pilchards or nothing. And bream being bream, they'll eat almost anything – prawns, crabs, bread, even raw chicken. My dad used to fish chicken with parmesan cheese off the beach. I'm not saying start there, but it tells you everything about how unfussy these fish can be. The bait matters less than how you present it.
Bait Presentation: The Half Hitch Is Your Best Friend
This is the bit that I think separates a good bait fisherman from an average one, and it costs nothing… presentation.
For a long, slender bait like a pilchard or a garfish, you've got three options – the head, the mid section, or the tail. For me, my favourite is the tail, and here's why. When I rig my baits, I like to half hitch the line around the bait to secure it to the hook. The tail gives you a perfect little anchor point (almost a nook) for that half hitch to lock into. Thread the hook through the bait with the shank running towards the tail, wrap a half hitch around that tail wrist, pull it tight, and the bait sits perfectly straight with the hook point nicely exposed. The line is actually holding the bait on, not just the hook. It casts better, it doesn't spin in the current, and it looks natural in the water.
For a fillet or slab bait like mullet, you've got the chunk-versus-strip debate. If I'm fishing for bream, or drifting a bait back for mulloway or snapper for that matter, I love a long strip bait. Cut down the middle of the fillet, trim it to the size of your hook, pin the hook in and out through the skin, and finish with the same half hitch. A strip is streamlined, so the fish can swallow it whole easily, whereas a big chunky bait can be hard for a bream to get in its mouth. Whatever you choose, the goal is the same: good hook exposure and a bait that hangs straight and natural.
The Theories That Caught Fish Today
Every session on The Everyday Angler runs on a theory or two, and this one proved a couple of good ones.
Theory one: where there's one bream, there's a school. When I hooked that first fish, at least ten others came up alongside it. Later in the session a whole school followed a hooked fish to the surface. So when you feel a little pick or a nudge, don't rip the bait away – there are likely ten or fifteen fish competing around it. Leave it there, stay patient, and wait for the bigger, hungrier one to muscle in and take it properly. That's exactly how the best fish of the session ate.
Theory two: fish the wash in the middle of the day. That patch of bubbles was the only feature on the whole wall, and it held basically every fish we caught. Whitewash means cover, oxygen and food. If you're staring down a featureless rock wall, find the wash.
Theory three: when the bites stop, change something. Weighted versus unweighted. Pilchard versus garfish. Tail versus strip. I tested three baits and two rigs in ninety minutes, and by the end of it I knew exactly what the fish wanted on the day. Put enough casts in with enough small variations and you'll soon figure it out – that's not luck, that's a process you can repeat on any rock wall in the country.
Tips and Tricks for Rock Wall Bream
Keep your net within arm's reach. Not up on the rocks behind you. Not back at the car. I went to all the effort of buying a net specifically designed for rock walls, carried it down, hooked the exact fish I came for (a proper 40cm-plus yellowfin bream) and lost it at my feet because the net wasn't nearby. Let this be a lesson: the net goes where you're standing.
Reuse a well-pinned bait. When a bait has been rigged with a half hitch and a fish is hooked cleanly in the corner of the jaw, you can often salvage the bait – pull the half hitch tight again, reset the hook point, and cast straight back to where you caught the last fish. His mates are still there.
Expect (and accept) snags. Fishing around structure means losing gear occasionally. Carry spare hooks and sinkers, re-rig quickly (it's only one knot, remember), and get back in the water.
Fish the tide, not the clock. The moving water is what makes an unweighted bait fishable, drifting it naturally along the wall. Slack water makes everything harder.
Handle bream carefully. They've got a few spikes along the top, so get a confident grip behind the head. Anything around the 25cm legal mark is a great fish to release for another day - there are always bigger ones out there, and the big breeders keep the fishery firing.
Take the family. This is the perfect style of fishing if you don't have a boat, if you're on holidays, or if you want to take the kids for a fish. Simple gear, one hook, constant bites, and there's always the chance of exciting bycatch - mangrove jack, mulloway and flathead all patrol the same walls.
Sure, you'll get some small ones, and you'll go through a few sizes before you find the better fish. But sometimes the humble yellowfin bream is enough. An hour on the rocks, a handful of bait, and constant action. That's what fishing should be.
Your Rock Wall Bream Checklist
Keen to give today's adventure a go? Stock up in store at BCF by screenshotting the products we used in today's episode, or head to bcf.com.au.