XTM 4x4 Accessories
Pay in 4
XTM 40A DC-DC 2.0 Battery Charger
Details
https://www.bcf.com.au/p/xtm-40a-dc-dc-2.0-battery-charger/674159.htmlPromotions
Special Offer
Pay in 4
Or 4 payments of
$100.00
with
Buy now, pay four interest-free payments.
- 4 simple installments
- 100% interest-free, no hidden fees
XTM 40A DC-DC 2.0 Battery Charger
Additional Information
Product Info
Product Info
The XTM 40A DC-DC 2.0 Battery Charger is the perfect solution for keeping your second battery charged while you're in the great outdoors. It features a 40A capacity and can be used to charge your battery by both DC and solar inputs. This DC-DC charger is compatible with Lead-acid, AGM, Gel, Calcium and LiON (LiFeP04) batteries and features 6 charging steps for optimal charging and to protect your battery.The 6 stages are;
Qualification: The charger will test the battery for faults. If the battery voltage is lower than 2V then it can't be charged. If it is higher than 2V it will move on to stage 2.
Recondition: After the charger identifies the battery voltage, it will start to charge the battery with a small current to activate the battery and... improve battery charging efficiency.
Bulk Charge: Maximum charge current is delivered to the battery, minimising charge time.
Absorption: With the increase of battery voltage, the charging current to the battery will then reduce to avoid over charging.
Full and Analysis: When the battery voltage level reaches a fully charged state, the charging current will drop to 0. The charger will then shut off all output and measure the voltage drop over 1 minute before entering the next charging stage.
Maintenance: The charger will continue sending small pulse currents to the battery keeping the voltage on about 13.5V. If the voltage drops below 13V, stages 1-5 will repeat.
It also features a range of safety protections including overcharging, short circuit, over temperature and reverse polarity and is IP65 dust proof and water resistant. It has easy push button selection to choose your battery type and a memory function that will memorise the battery type and applies it as the default for the next charge cycle. For easy battery charging on your outdoor adventures don't look past the XTM 40A DC-DC 2.0 Battery Charger. Read more +
Qualification: The charger will test the battery for faults. If the battery voltage is lower than 2V then it can't be charged. If it is higher than 2V it will move on to stage 2.
Recondition: After the charger identifies the battery voltage, it will start to charge the battery with a small current to activate the battery and... improve battery charging efficiency.
Bulk Charge: Maximum charge current is delivered to the battery, minimising charge time.
Absorption: With the increase of battery voltage, the charging current to the battery will then reduce to avoid over charging.
Full and Analysis: When the battery voltage level reaches a fully charged state, the charging current will drop to 0. The charger will then shut off all output and measure the voltage drop over 1 minute before entering the next charging stage.
Maintenance: The charger will continue sending small pulse currents to the battery keeping the voltage on about 13.5V. If the voltage drops below 13V, stages 1-5 will repeat.
It also features a range of safety protections including overcharging, short circuit, over temperature and reverse polarity and is IP65 dust proof and water resistant. It has easy push button selection to choose your battery type and a memory function that will memorise the battery type and applies it as the default for the next charge cycle. For easy battery charging on your outdoor adventures don't look past the XTM 40A DC-DC 2.0 Battery Charger. Read more +
Features
- Ideal solution for keeping your second battery charged
- 40A capacity with MPPT solar regulator input
- Compatible with Lead-acid, AGM, Gel, Calcium and LiON (LiFeP04) batteries
- Sophisticated 6 stage charging
- Fully automatic high frequency multi stage charging
- Input voltage: DC 10.8V-16V / Solar 13.5V-25V
- Built-in overcharging, short circuit, over temperature and reverse polarity protection
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature for longer battery life
- IP65 dust proof and water resistant
- 12 month warranty
Tech Spec
XTM 40A DC-DC 2.0 BATTERY CHARGER
| CHARGE TYPE | Multi-stage |
|---|---|
| INPUT VOLTAGE DC | Battery - 10.8V - 16V Solar - 13.5V - 25V |
| CUT IN/OUT VOLTAGE WITH INGNITON LEAD DC | 11.5V - 10.8V |
| CUT IN/OUT VOLTAGE WITH NO IGNTION LEAD DC | 13V - 12.4V |
| OUTPUT CURRENT | 40A |
| MINIMUM STARTING VOLTAGE | 2V |
| SOFT START CHARGNING | Yes |
| BULK CHARGE VOLTAGE | Gel - 14.3V Lead Acid - 14.7V AGM - 14.7V Calcium - 15.3V LiFePO4 - 14.4V |
| FLOT CHARGE VOLTAGE | 13.5V |
| FLOAT CHARGE CURRENT | 100mA |
| SUITS BATTERY CAPACITY | 40 - 400AH |
| CASE MATERIAL | Aluminium |
| IP RATING | IP65 |
| MAX OPERATING TEMP | 70°C |
| DIMENSIONS | 194x119.5x37.5mm |
| WEIGHT | 1.65kg |
| WARRANTY | 12 months |
"
Articles
Reviews
Reviews
Average Ratings
Quality, 4.3 out of 5
charging
battery
price
installation
purchase
for emergencies
setup
connections
1 to 2 of 27 Reviews
1 – 2 of 27 Reviews
Highest to Lowest Rating
Beemaboi
- Verified Purchaser
Dargaville
Review 1
Votes 0
5 out of 5 stars.
Awesome little unit
- Verified Purchaser
26 days ago
Great dc dc charger and mppt controller ,definitely worth the price will definitely buy again
ProsAs Described, Good Quality, Good Value, Good Construction
How often do you use this product?Daily
Yes, I recommend this product.
Originally posted on Supercheap Auto NZ
Anonymous
- Verified Purchaser
Kalbarri WA
Review 1
Votes 0
5 out of 5 stars.
XTM review
- Verified Purchaser
a month ago
Excellent dc dc charger with solar connect. Very easy to fit thanks to it being pre wired with anderson plugs. Small unit so it does not take up much space.
How often do you use this product?Weekly
Yes, I recommend this product.
Helpful?
Quality, 5.0 out of 5